CIRCUTOR CVM-B Series - Manual (Page 152)

● When programming the latch:
The latch is selected in this parameter, i.e., if the relay digital output is locked after it has been
tripped, even when the condition that triggered it has disappeared.
NB: If the unit loses its power supply, the latch disappears.
Enable the latch.
Disable the latch.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the home screen of the setup menu figure 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
5�6�16�- Transistor digital outputs�
Select the output to configure on the main configuration screen of the transistor digital
outputs, figure 130 .
figure 130: Main configuration screen of transistor digital outputs.
The following options appear in the lower area:
152
CVM-B100 - CVM-B150
Instruction Manual