Altera Low Latency Ethernet 10G MAC - Manual (Page 15)

Parameter Value Description
Timestamp fingerprint width 1–32 Specify the width of the timestamp fingerprint
in bits on the transmit path. The default value is
4 bits.
Time of Day Format Enable 96b Time of Day
Format only, Enable 64b
Time of Day Format
only, Enable both 96b
and 64b Time of Day
Format
Specify the time of day format.
Use legacy Ethernet 10G
MAC XGMII
On, Off Turn on this option to maintain compability
with the 64-bit Ethernet 10G MAC on the
XGMII.
This parameter is not available if you turn on
the Enable 10GBASE-R register mode
parameter.
Use legacy Ethernet 10G
MAC Avalon Memory-
Mapped Interface
On, Off Turn on this option to maintain compability
with the 64-bit Ethernet 10G MAC on the
Avalon-MM Interface.
Use legacy Ethernet 10G
MAC Avalon Streaming
Interface
On, Off Turn on this option to maintain compability
with the 64-bit Ethernet 10G MAC on the
Avalon-ST interface.
This parameter is not available if you turn on
the Enable 10GBASE-R register mode
parameter.
Generated Files
The following table describes the generated files and other files that might be in your project directory.
The names and types of generated files specified in the MegaWizard Plug-In Manager report vary
depending on whether you create your design with VHDL or Verilog HDL.
Table 2-1: Generated Files
Extension Description
<variation name>.v or .vhd A MegaCore function variation file, which defines a VHDL or Verilog HDL
description of the custom MegaCore function. Instantiate the entity defined
by this file inside of your design. Include this file when compiling your
design in the Quartus II software.
<variation name>.cmp A VHDL component declaration file for the MegaCore function variation.
Add the contents of this file to any VHDL architecture that instantiates the
MegaCore function.
<variation name>.qsys A Qsys file for the MAC IP core design.
2-6 Generated Files
UG-01144
2014.12.15
Altera Corporation Getting Started with LL Ethernet 10G MAC
Send Feedback