EXFO FTB-8500 Series for FTB-200 - Manual (Page 50)

Introducing the Smart User Interface
36 FTB-8500 Series and FTB-8120NGE/8130NGE
Main Window
Main Menu
The main menu gives access to the following main menu items.

File gives access to the following controls:

New clears the current test. A user’s confirmation is required
before clearing the test.

Open allows setting up the test case by loading a previously saved
configuration. Open is available when the test is not running. Press
Open, select an existing file and press OK to confirm. The default
directory is \Data\My Documents\PacketBlazerG2\Configuration.
The configuration file extension is cfg.
Note: An error message is displayed and the configuration is not loaded when the
file is corrupted, the module is not properly installed, the hardware or
software options are not compatible, or when the resources or power are
not sufficient.

Save As saves the current test configuration.
Select an existing file, or type a new name in the File name field
and press OK. The default directory is
\data\My Documents\PacketBlazerG2\Configuration.

Report generates a report of the current test. Not available on the
FTB-200 v2, refer to Report button from the Global Test Status and
Controls on page 41. See Test Report Generation on page 46 for
more information.

About gives information on the company, contact information, and
unit software/hardware information.
Note: New, Save As, and Report are only available when the test is created and
not running.