EXFO FTB-8500 Series for FTB-200 User Manual
Page 343
Expert Mode Tabs
Ethernet and Fibre Channel Application
329
Back-to-Back (RFC 2544)
Copy From Measurement button: Copy the performance results from
the test that ran previously and use it as the Pass/Fail criteria. If no test
ran before, default values used will be 0 Frames/Burst.
Unit: Select the unit. Choices are: bps, Kbps, Mbps, Bps, KBps, MBps,
Gbps, GBps, % Util, fps (Frame Per Second), Frames/Burst, and
Bytes/Burst. The default setting is Frames/Burst.
Layer: Select the Layer. Choices are Layer 1,2,3, Layer 2,3, and
Layer 3. The default setting is Layer 1,2,3.
Layer 1,2,3 contains the Preamble, Start of Frame Delimiter, MAC
address, IP address, and data.
Layer 2,3 contains the MAC address, IP address, and data.
Layer 3 contains the IP address, and data.
Displayed Results: Select the displayed results mode. Choices are
Current, Minimum, Maximum, and Average. The default setting is
Current.