EXFO FTB-8500 Series for FTB-200 User Manual
Page 287
RFC 2544 Tabs
Ethernet and Fibre Channel Application
273
Latency Results
Frames Count
TX-to-RX/P1-to-P2/P2-to-P1/Local to Remote/Remote to Local: Gives
the number of frames for the indicated direction. P1-to-P2/P2-to-P1 is
only available with FTB-8510B.
TX Frame Count: Indicates the number of transmitted frames.
RX Frame Count: Indicates the number of received frames.
Latency Results
Note: The “--” indicates that the result is not available because the test has not
run yet or the measured value is not valid.
Frame Size: Indicates the frame sizes used for the test. Up to seven
different frame sizes can be displayed.
TX-to-RX/P1-to-P2/P2-to-P1/Local to Remote/Remote to Local:
Gives the latency for the corresponding direction.
P1-to-P2/P2-to-P1 is only available with FTB-8510B.
Note: Latency measurement values below 15 μs will be shown as “<15 μs” for
Dual Test Set. For all other test cases, values below 0.5 μs will be shown as
“<500 ns”.