Toa SX-2000 Series - Manual (Page 99)

99
EVENT SETTINGS
Function Description
12.2.9. General EV broadcasts
General EV messages can be broadcast over the desired zone(s) by pressing the remote microphone's
function key.
When making general EV broadcasts from equipment other than the remote microphone, select
"Pattern
Settings General Broadcast Pattern Settings" (p. 79) to create the general broadcast pattern using the
general EV message, then assign the pattern to each function key or control input in the "Event Settings"
(p. 87) .
General EV broadcast operations change as follows depending on the "Playback method settings" (p. 49)
selected by clicking "System Settings SX-2000SM."
[EV message setting examples]
Playback method
EV Message 1 Once
EV Message 2 Endless
• EV Message 1: When the "Playback method" is set to "Once"
The EV message ends after being broadcast once.
Pressing the remote microphone's function key during EV message playback causes the general EV
broadcast to end.
• EV Message 2: When the "Playback method" is set to "Endless"
The general EV broadcast continues to play repeatedly until the remote microphone's function key is
pressed.
EV Message 1 broadcast
Playback method: Once
Function key 1
(EV Message 1)
ON
EV Message 2 broadcast
Playback method: Endless
Function key 2
(EV Message 2)
ON ON