Communications between the sx-2000sm and a pc – Toa SX-2000 Series User Manual
Page 154
154
COMMUNICATIONS BETWEEN THE SX-2000SM AND A PC
14. COMMUNICATIONS BETWEEN THE SX-2000SM AND A PC
Setting data or log files can be acquired in real time or the system status can be monitored by connecting the
SX-2000SM to a PC installed with the SX-2000 software.
Notes
• When two or more SX-2000SMs are connected to a switching hub, communications may not be correctly
established with the PC if their IP addresses are duplicated. Be sure to set different IP addresses for all SX-
2000SMs connected to the switching hub and establish communications. (Refer to
• Multiple PCs cannot simultaneously access the same SX-2000SM.
• Network settings cannot be changed nor can the system be reset, even while communications are
established, unless the network setting detection has been completed.
• Only SX-2000SMs of firmware version 3.0 or later can communicate with a PC. Since the latest firmware
version for the SX-2000SM is made available on TOA's product download site (http://toa-products.com/),
please download it for use.