Toa SX-2000 Series - Manual (Page 71)

71
PRIORITY SETTINGS
10. PRIORITY SETTINGS
Pressing the [Priority settings] button displays the screen below.
Set input sound source priority levels.
(3) (1)
(1) Priority control
Select how to assign priority among multiple input sound sources all set to the same priority level.
Note
The control type cannot be set differently for individual sound sources.
FIFO, LIFO (default) Available Settings
(2)
[When set to FIFO]
• Broadcast not possible to zones where a sound source with a higher priority is already broadcasting.
• Broadcast not possible to zones where a sound source with the same priority is already broadcasting.
• Broadcasts to zones where a sound source with a lower priority is already broadcasting will interrupt and
override that lower priority broadcast.
The original broadcast will resume once the broadcast from the higher priority sound source has finished.
[When set to LIFO]
• Broadcast not possible to zones where a sound source with a higher priority is already broadcasting.
• Broadcasts to zones where a sound source with the same priority is already broadcasting will interrupt
and override that broadcast.
The original broadcast will resume once the broadcast from the higher priority sound source has finished.
• Broadcasts to zones where a sound source with a lower priority is already broadcasting will interrupt and
override that lower priority broadcast.
The original broadcast will resume once the broadcast from the higher priority sound source has finished.