Toa SX-2000 Series - Manual (Page 157)

157
COMMUNICATIONS BETWEEN THE SX-2000SM AND A PC
Reading CF Card Setting Data Online
14.2. Reading CF Card Setting Data Online
The PC can be loaded online with setting data stored on the CF card inserted into the SX-2000SM.
Step 1. Establish communications between the SX-2000SM and the PC installed with the SX-2000 software.
For the procedure for establishing communications, refer to p. 155 "Establishing Communications
Between the SX-2000SM and a PC."
The "Connection" indication is displayed in the lower right corner of the screen after the connection is
completed.
Step 2. Select [Communication SX CF Online read (SX->PC) ] from the menu bar on the Setting Software.
Note
This selection cannot be made when the Utility screen
(p. 120 "Utility") is displayed.
The following screen is displayed.