Toa SX-2000 Series User Manual
Page 171
171
READING THE SETTINGS FILE
Step 4. When the screen below is displayed, click the [Yes] button.
This starts Setting file reading. The screen below is displayed during a read operation.
The screen below is displayed after settings file reading is complete.
Step 5. Click the [OK] button.
Note
Reading the settings data saved in the "s2d" file format causes the following settings items to be automatically
converted.
[Remote Microphone's chime volume setting]
The setting range of the Remote Microphone's chime volume is from 0 to –20 dB (in 1 dB steps) for the old
version Setting Software and from 0 to –20 dB (in 2 dB steps) for the new Setting Software.
If the old parameter is an odd number, the new one becomes the value increased by 1 from that old
parameter.
Before conversion (s2d format)
After conversion (smd format)
0 dB
0 dB
–1 dB
0 dB
–15 dB
–14 dB
–20 dB
–20 dB
Chime volume
(Example)
[Priority level settings]
The priority level parameters on the new Setting Software become the values increased by 257 from those set
using the old version Setting Software.
Before conversion (s2d format)
After conversion (smd format)
0
257
10
267
Priority level