Toa SX-2000 Series - Manual (Page 160)

160
COMMUNICATIONS BETWEEN THE SX-2000SM AND A PC
Writing Setting Data to the CF Card Online
Step 4. Press the [OK] button.
Tip: Writing is not executed if the [Cancel] button is clicked.
The following screen is displayed and writing begins.
The following screen is displayed when the sound source data saved to the CF card and the sound
source data registered in the setting software are the same.
Step 5. To overwrite, click the [OK] button.
Note
A little time may be required to transfer EV messages.
Clicking the [Cancel] button transfers all setting data except the EV messages, enabling reduction of
transfer times.
The following screen is displayed after writing is completed.
Step 6. Press the [OK] button.