Toa SX-2000 Series User Manual
Page 11
11
[Emergency broadcast setting example]
• Emergency sequence settings
Phase 1
EV message 1, 5-minute broadcast
Phase 2
Phase 3
EV message 2, Continuous broadcast
• EV message settings
Message name
EV message 1
EV message 2
Audio file
sign001.wav
sign002.wav
Type
Alert
Evacuation
Note: Phase 3 is not set in this example.
Emergency
sequence 1
1
2
1
2
3
4
5
6
• Output zone pattern setting
Output zone pattern (No.)
Zones
SX-2100AO's output channels
Assign each function to be used at the time of emergency broadcast to the
control inputs of the devices or the key on the remote microphone.
Perform this in the "Event settings."
[Emergency broadcast pattern configuration]
Emergency
sequence
Output zone
Control output
pattern
Emergency
broadcast
pattern
Phase 1
EV message +
broadcast duration
EV message +
broadcast duration
EV message +
broadcast duration
Individual or
pattern (multiple zones)
Individual or
pattern (multiple zones)
Individual or
pattern (multiple zones)
Phase 2
Phase 3
Multiple control outputs
Multiple control outputs
Multiple control outputs