Toa SX-2000 Series - Manual (Page 116)

116
[If "Failure output receipt" is selected for "Function" ]
(3) Contents (left side)
Select the failure output pattern to be assigned to the keys on the RM-200SF or RM-210.
Set the failure output pattern using
"Pattern settings Failure output pattern settings" (p. 85) .
Set failure output pattern (default: Failure output pattern 1) Available Settings
[If "Emergency reset" is selected for "Function" ]
(3) Contents (left side)
Select the EV message (Type: Reset) to be broadcast by the keys on the RM-200SF or RM-210.
Set the EV message using
"System settings System Manager EV Message" (p. 45) .
If the EV message is set to "None," it is not possible to set "Control output pattern" (next item).
None (default), Set EV message Available Settings
(4) Contents (right side)
Select the control output pattern that operates in synchronization with the keys on the RM-200SF or RM-
210.
Set the control output pattern using
"Pattern settings Control output pattern settings" (p. 81) .
None (default), Set control output pattern Available Settings
[If "Emergency sequence phase shift" is selected for "Function" ]
(3) Contents (left side)
Select the emergency sequence to be shifted to by the keys on the RM-200SF or RM-210.
Set the emergency sequence using
"Pattern settings Emergency sequence settings" (p. 82) .
Set emergency sequence (default: Sequence 1) Available Settings
EVENT SETTINGS
RM Event Settings (RM-200SF)
[If "Emergency sequence stop" is selected for "Function" ]
(3) Contents (left side)
Select the emergency sequence to be stopped by the keys on the RM-200SF or RM-210.
Set the emergency sequence using
"Pattern settings Emergency sequence settings" (p. 82) .
Set emergency sequence (default: Sequence 1) Available Settings