Toa SX-2000 Series - Manual (Page 167)

SAVING THE SETTINGS FILE
15. SAVING THE SETTINGS FILE
Output the data set using the Setting Software as a file (smd file format), which is usable by the SX-2000
system.
Save this settings file to a CF card and allow the SX-2000SM to read this card in order to begin operation of
the system. (For the method of using the SX-2000SM to read the settings file, see the separate Operating
Instructions, "Operating Settings Data.")
Step 1. Select [File Save] from the menu bar on the Setting Software.
Step 2. Using the "Save in" pull-down menu, select the drive assigned to the CF card.
Step 3. Set a "File name."
Notes
• The filename "Sx2k2nd.smd" is assigned by default.
• When using the SX-2000SM to read a CF card, be sure to use the filename "Sx2k2nd.smd." Setting
data cannot be read if a different filename is used.
Step 4. Press the [Save] button.
A "Save As" dialog is displayed.
167