Ecler ECLERNET MANAGER - Manual (Page 80)

80
7.6.4. Matrix Link Groups
Matrix Link Groups are a tool to group and synchronize matrix controls, so that operating one of them
simultaneously operates all elements belonging to the same group.
Within a group there may be knobs for inputs, outputs, matrix crossing points or a mix of them.
To create or edit a group, you must click on a selection button in order to light it up in green, as for Group
2 in this image:
Then the control to select the group type will flash, indicating that the group is in edit mode, enabling the
following actions:
1. Selecting the group type (right mouse button):
 Mute Group: operating one of the included controls mutes or unmutes simultaneously
all of them, maintaining independent level adjustments
 Volume Group: included controls always share the same level. Changing one of them
has exactly the same effect on all group members, maintaining independent ON/OFF
mute status
 Mute & Volume Group: level value ON/OFF mute status are both common to all
elements of the group
 Parallel Output Group: columns belonging to one of these groups behave exactly the
same for the routing of the input signals they receive (enabled/disabled crossing
points, levels, mute ON or OFF, selection of sources from the carousel lists). This
option is ideal when you need to combine individual rooms into a larger one, so that
dedicated outputs always share the same audio content, and you have to control only
one of them to control all rooms. Output parameters (level, EQ, compressor for each
output, OUT1, OUT2, and so on) of affected columns are still available for free
individual settings (same content but different output levels and equalization if
necessary)
2. Selecting the group members: click on the knobs you want to include in the group being edited.