Ecler ECLERNET MANAGER - Manual (Page 122)

122
The first parameter to set is the source selection or SELECTOR:
 GPI: GPI port that is connected to the INPUT discrete potentiometer of the WPVOL-SR unit
 Type: select CAROUSEL to allow sound sources or even Presets to be selected. After
selection, new options are displayed:
The new available options for the SELECTOR function are:
 Polarity (DIRECT/INVERSE): determines how the received signal is interpreted in the GPI (0 to
10 VDC): 0 VDC as minimum and 10 VDC as maximum or vice versa. Each position of the
WPVOL-SR INPUT control (OFF, 1, 2, 3 or 4) provides a voltage from 0 to 10 VDC to its GPI
port.
 Carousel: carousel list selected for the WPVOL-SR control; it must have been previously created.
A carousel list contains the available options for selecting either the input sound sources (Inputs)
or the MIMO88 Presets from a WPVOL-SR unit with its INPUT control. In this case the carousel
list may include up to 5 inputs (musical sources) matching the 5 positions of the WPVOL-SR
INPUT control. If you select a carousel list of Presets, it may also contain a maximum of 5
Presets. See section: 7.11. Carousel lists for MIMO88 for more information about the creation
of carousel lists.
 If the selected carousel list is for inputs (sound sources), a new drop-down menu appears to
select the destination output for this selection (destination zone area linked to the selected input
in each case, or destination zone controlled by the WPVOL-SR unit):