Ecler ECLERNET MANAGER User Manual
Page 64
64
"LINK" LED indicators on the MIMO88's front panel have different behaviours, depending on whether the
unit operates in 8x8, 16x16 MASTER or16x16 SLAVE mode and on its status:
8x8 MASTER mode: LED off
16x16 MASTER mode:
o Fast flashing green LED: correct MASTER-SLAVE connection, error-free communication
o Fast flashing LED, alternating between green and red: communication error in the
MASTER-SLAVE connection
o Slow flashing LED, alternating between green and red: no BUS LINK-connected SLAVE
is detected or it's another MASTER unit
16x16 SLAVE mode:
o Fast flashing orange LED: correct MASTER-SLAVE connection, error-free communication
o Fast flashing LED, alternating between orange and red: communication error in the
MASTER-SLAVE connection
o Slow flashing LED, alternating between orange and red: no BUS LINK-connected
MASTER is detected or it's another SLAVE unit
If MASTER-SLAVE connection is invalid, a broken link symbol appears (green and red flashing
rectangles) in EclerNet Manager, in the MASTER device status window. Possible causes are:
no device connected to the BUS LINK of the MASTER unit
connected equipment is another MASTER unit (its rear panel switch is in MASTER position
instead of SLAVE)