Ecler ECLERNET MANAGER User Manual
Page 193
193
11.2.1. “Connect to…” Menu
This menu allows you to set the UCP server the unit will connect to as a client. The UCP server may be
a computer, another WPmSCREEN or even the same WPmSCREEN. In any case, the UCP server shall
host an EclerNet Manager project that includes a series of UCPs which can be remotely managed by
any UCP client.
It is possible to directly enter the IP address of the server device, using the touch keyboard displayed on
the screen, or to select a device from a list of automatically detected devices, which is accessed by
clicking on the button with the list icon to the right of the "Connect" button: