Ecler ECLERNET MANAGER - Manual (Page 7)

7
o Power Sequencing Time (0 to 5000 milliseconds): sets the power sequence time delay
between a device and following devices involved in the Project.
o Enable Auto-Lock and Timeout (1 to 30 minutes): when you have assigned a password to
anyone of the high-level users (Administrator and/or Advanced User), you may enter the
protect mode of the project, either by pressing the Lock toolbar button, or once "auto-lock"
(automatic activation of the protect mode) time out has passed without user activity on the
Project when the option Enable Auto-Lock is checked. To re-access the DEPLOY or
DESIGN mode, you must enter the password respectively assigned to the Administrator
or Advanced User.
o Enable e-mail Notifications: enables/disables sending emails from the specified address
(From Address) and to the three possible specified destinations (To Addresses) in the
dialog box. Includes a "Test" button to test this function operation (when pressed, a test e-
mail is sent).
o Enable Local Time/Date Update Automatically: allows the unit internal clock to
automatically sync with Windows time changes, an especially useful function for daylight
saving time.
Notes: (about e-mail sending)
 The e-mails sent include the project name in their subject field.
 To be able to send these e-mails, SMTP settings for the PC have to be done in the
Edit / Preferences menu.
There is a notice in the following cases:
 Alarms
 System Fault: for example, hardware failure (fuse, power supply...) of NPA
series amplifiers.
 Coded errors (hardware, firmware, DSP...)
 RTC (Real Time Clock) reset
 When a device is disconnected from Ethernet.
 When you load a Project if some device is missing.
 For an event designed for this purpose (available in future versions).