Ecler ECLERNET MANAGER - Manual (Page 22)

22
4. EclerNet PROJECT
A Project is a configuration and remote control file for EclerNet device network. It contains a number of
EclerNet virtual devices, structured according to a hierarchical arrangement of control groups for such
devices and/or for their audio channels.
The purpose of a Project, once online, is to configure, remotely control and monitor a number of
hardware devices connected to an Ethernet network. The network can include any combination of
EclerNet compatible devices: NZA series amplifiers, NPA series amplifiers and MIMO88 digital matrix.
The created file has the .enp extension and must be opened and operated from the EclerNet Manager
application.
A Project can be created and edited offline, without being connected to the site Ethernet network, and
later turned to online or real system management mode from a PC connected to the same network
EclerNet compatible devices are connected to.
Example of EclerNet network including NZA, NPA and MIMO88 devices, the computer running EclerNet
Manager and Ethernet network infrastructure that interconnects them.