Ecler ECLERNET MANAGER - Manual (Page 155)

155
The inputs assigned to automatic mixing in the AUTOMIXER module must first be properly assigned in
the MATRIX section, by adjusting the MUTE and level controls of its crossing points to correctly route
them toward the desired outputs.
The picture above shows how inputs 1, 3, 4, 5 and 6 are routed toward outputs 3, 4, 9 and 10. Thus it
would be possible that any selection of these inputs and outputs in the AUTOMIXER module could result
in an automatic mixture according to the settings made in this module.
8.7.1. AUTOMIXER. NOMA or EXCLUSIVE automix modes
The AUTOMIXER has two operating modes:
 NOMA: “Number of Open Microphones Attenuated”. In this mode, the automatic mixing algorithm
allows a fixed number of input signals (usually picked up by microphones) to be simultaneously
part of the mix, reducing or increasing their total gain when the number of microphones included
in the mix increases or decreases (more active signals in the mixture, less total gain).
 EXCLUSIVE: in this mode only a single microphone is part of the mixer channel at a given
moment, once the algorithm considers that it complies with its requirements. Another microphone
can be used when the first one has released the channel.
The user controls of the AUTOMIXER section are the following: