Ecler ECLERNET MANAGER - Manual (Page 121)

121
Once you add such a control, it will be included in the REMOTE LIST. Selecting it opens the
configuration window:
In its upper part, the window includes:
 Enable/Disable Remote button: to enable (lit in green) or disable each WPVOL-SR unit
connected to the MIMO88. The state (enabled or disabled) of all remote controls is stored in a
system Preset when you save it, so that you can manage at any given time which remote
controls are enabled or not by recalling each Preset (e.g. when loading a Preset for asking to
evacuate a building with a pre-recorded message, all remote controls of the installation are
disabled to avoid user interferences in such special scenario in which the evacuation message
prevails on the rest of the audio signals...).
 HID indicator: N/A for analog controls
 Firmware indicator: N/A for analog controls
Now comes the configuration area:
 icon (Change Configuration): to change the unit configuration
 icon (Save Configuration in Remote): N/A for analog controls
Clicking the icon displays the WPVOL-SR configuration window: