Ecler ECLERNET MANAGER - Manual (Page 125)

125
7.11. Carousel lists for MIMO88
A carousel list is a set of selectable options for a remote control connected to a MIMO88 unit, such
selection being "circular" (hence the name carousel).
We call circular selection the ability to scroll the various list options via an endless dial, from the first to
the last, then indefinitely re-starting from the first in the list and so on, as long as you keep rotating the
control in the same direction, either clockwise or counter-clockwise.
Example of circular list or carousel list with 4 available options
MIMO88 supports two types of carousel lists: for inputs and for Presets:
 Carousel list of inputs: contains a series of matrix audio inputs, so that a remote control can
select one of them as a sound source sent to a particular audio output of the unit. In other words,
in a zoned facility (input with several sound sources and multiple output zones) a remote control
managing a particular zone of the facility can use a list of this type to select the audio content to
be played in that zone
 Carousel list of Presets: contains a series of Presets stored in the unit, so that a remote control
can select and recall one of them, instantly changing the configuration of the MIMO88 unit
according to the parameters recorded in the Preset
Note: A WPTOUCH or WPVOL-SR type remote control can operate a same Project with a single
carousel list only, whether of inputs or Presets, in order to behave as source selector for a
destination zone or as Preset selector to recall a Preset. A single control remote can never have both
functions in a same Project, nor operate with several carousel lists. Carousel lists, on the other hand,
are common to a single Project and are not related to Presets: lists and their contents are fixed and
do not depend on the Preset that selected them.
Clicking the icon located in the upper right corner of a MIMO88 detailed view opens the window for
creating and editing carousel lists.
Note: as for other functions with a potential risk of structural changes in a Project, carousel list
management is available in DESIGN mode only.