Ecler ECLERNET MANAGER - Manual (Page 124)

124
 GPI: GPI port that it is connected to the additional hardware button or switch
 Type:
o NONE: no MUTE function assigned
o X-FOCUS MUTE: the button or switch is associated with the MUTE function of the crossover
point between the input currently selected by the INPUT control and assigned output
(destination zone)
 Additional options when the X-FOCUS MUTE type is selected are:
o Polarity (DIRECT/INVERSE): determines how the received signal is interpreted in the GPI (0
or 10 VDC): function is activated for 0 VDC and deactivated for 10 VDC or vice versa.
o Mode: operating mode of the button or switch:
 PUSH: one state when the key is pressed (closed contact) and the opposite state
when the key is not pressed. The possible states are MUTE ON and MUTE OFF
 TOGGLE: each push of the button toggles the state between MUTE ON and MUTE
OFF.