Ecler ECLERNET MANAGER - Manual (Page 143)

143
7.12.5. Calendar-based events (TIME SCHEDULER)
This type of event receives its input stimulus according to a calendar with date and time of onset,
duration, days of the week it must be activated or not, repetition by time interval or number of repetitions
and end date. The MIMO88 has an internal clock that allows the management of such events, even if not
connected to a computer and synchronized with EclerNet Manager.
When selecting an event of this type to create or edit it, the following configuration window opens:
 START DATE / TIME: date and time the event activation period starts from
 ACTIVE ON: days of the week for which the event triggering is enabled or not
 LOGIC:
o the active state of the event is considered a “1” or high level (positive logic)
o the active state of the event is considered a “0” or low level (negative logic)
 HOLD: time during which the event is held in its active state
 REPEAT: if the check box is checked, the event may be triggered several times from the start
date and time:
o INTERVAL: time interval between a trigger and the next one
o TIMES: number of repetitions of the trigger
o END DATE / TIME: end date of the period enabled for repetitions