Ecler ECLERNET MANAGER - Manual (Page 180)

180
Thus, a UCP button could be used for example to activate a MIMO88's GPO or as a compound digital
event input, a type of event that uses Boolean logic operators (AND, OR, NOR, XOR, etc..) to trigger an
action depending on the status of various inputs. For example, an event of this type could be "if the GPI
#1 of the MIMO88 named OUTDOOR AREAS is closed (AND) a specific UCP button is activated, the
Emergency Preset should be recalled in this MIMO88 unit".
Another possible use of a virtual control (a rotary knob in this case) is to operate as a selector in a
carousel list of inputs or Presets. Thus, an UCP will have the same functions as the selector of a
WPTOUCH hardware control: