Ecler ECLERNET MANAGER - Manual (Page 127)

127
 The list type is displayed on the right: INPUTS or PRESETS
 The drop-down Mode menu allows you to choose between two operating modes for the input list:
o MIX: when several inputs are successively selected in the list, they are mixed together
and sent to the destination output. The remote control then behaves like a small mixer,
rather than as a pure sound source selector (in X-Focus mode the volume control will
adjust the relative level of each input in the mix)
o EXCLUSIVE: only one input can be selected and routed to the destination output.
Selecting an input in the list excludes the others: the other crossing points between list
inputs and destination output have a MUTE ON status
 Selection Count: number of inputs in the list (the maximum is 16)
 Input list for the unit: its options are OFF (no = silence) and inputs 1 to 8 or 1 to 16, depending on
whether it is a single MIMO88 (8x8) or a MASTER-SLAVE couple (16x16). To add or remove an
input to/from the carousel list, click on the check box on its left:
Example of carousel list containing the inputs OFF (silence), 2, 3 and 6
Once the changes are validated (OK key) the list will be configured and available for selection from one
or more WPTOUCH or WPVOL-SR remote controls.