Ecler ECLERNET MANAGER - Manual (Page 202)

202
11.4. WPmSCREEN as a UCP Server
The WPmSCREEN can store and execute a project previously created using EclerNet Manager, to
perform as a web server for the UCPs included in this project. Therefore, no computer running EclerNet
Manager is required when there's a WPmSCREEN in an EclerNet installation, in hidden mode or not,
and it has all the remote control features of the UCPs described in chapter 10.
The procedure for transferring an EclerNet project to a WPmSCREEN and enable it as a UCP server is
the following:
First you need to create or retrieve from the EclerNet Manager application (File -> Open) a project that
includes hardware and configuration used in the installation (MIMO88, NXA units, etc.), as well as the
desired UCPs, using the standard method described in the previous chapters of this manual. The
following image shows a project that includes a MIMO88 and 3 UCPs. The green connection icons
indicate that the MIMO88 is "online" and under the control of the computer running the project from the
EclerNet Manager application, a proof that the network configuration of the computer and the MIMO88
device is suitable for a correct communication between them:
Note in the image above the Project Explorer window: it indicates that the project is running in Local
mode, i.e. in the computer whose IP address is displayed, and not (yet) in a WPmSCREEN. In this state,
the computer is acting as a UCP server.