Ecler ECLERNET MANAGER - Manual (Page 101)

101
7.10.1.1. Configuring the WPTOUCH for operating with a carousel of Presets
After selecting a carousel list of Presets for the Selection mode of a WPTOUCH, you can make this
selection from the WPTOUCH unit as follows:
 pressing T2 switches to the Selection mode (the triangular icon to the right of the LCD screen
moves up to the upper row)
 with the wheel, select one of the Presets contained in the carousel list
 pressing T2 again confirms the selection, the Preset is recalled and the triangular icon returns on
the bottom row (back to Volume mode). If T2 is not pressed again, the selection is not validated,
no Preset is recalled and the Volume mode automatically returns after a few seconds (triangular
icon on the bottom row of the LCD)
The following configuration function (VOLUME) lets you select which volume the WPTOUCH wheel
controls in the other mode, the Volume mode (when the triangle is on the right of the bottom row of the
LCD).