Ecler ECLERNET MANAGER - Manual (Page 118)

118
7.10.2. Configuring a MPAGE16-type remote control
The MPAGE16 is a console or desktop digital station for sending
voice messages in real time ("paging"). It features a gooseneck
microphone and 16 keys for selecting destination zones (1 to 16),
1 selection key for all zones (ALL), a CLEAR key to cancel the
last selection made and an activation key for paging (PAGE). It
also has two soft keys (F1 and F2) operating a mute function, a
GPO or a Preset recall. All keys are touch-sensitive and
associated with a status LED.
The configuration of a MPAGE16 console connected to the
MIMO88 is very simple:
 First you must include a MPAGE16 unit in the REMOTE LIST. See section: 7.10. MIMO88
REMOTES section.
 Selecting the desired MPAGE16 unit in the REMOTE LIST displays its detailed configuration
window:
In its upper part, the window includes:
 Enable/Disable Remote button: to enable (lit in green) or disable each MPAGE16 unit
connected to the MIMO88. The state (enabled or disabled) of all remote controls is stored in a
system Preset when you save it, so that you can manage at any given time which remote
controls are enabled or not by recalling each Preset (e.g. when loading a Preset for asking to
evacuate a building with a pre-recorded message, all remote controls of the installation are
disabled to avoid user interferences in such special scenario in which the evacuation
message prevails on the rest of the audio signals...).
 HID indicator: hardware ID (assigned at the factory, unique to each unit and not editable by
the user)
 Firmware indicator: unit's firmware version
Now comes the MPAGE16 configuration area:
 The icon (Change Configuration) is not usable with a MPAGE16 unit (but it is for the
WPTOUCH for example)
 The (Save Configuration in Remote) icon stores the MPAGE16 device configuration
Below appears the drop-down menu for the only setting option of MPAGE16 unit: the PAGER
module that will be assigned: