Ecler ECLERNET MANAGER User Manual
Page 146
146
Both AUTOMIXER and FEEDBACK KILLER settings can be
stored and retrieved using presets. In this way, different presets
can store different configurations of these two new sections, in
order to instantly recall those presets.
8.2. MIMO88 CONFERENCE Firmware Update
Starting from a standard MIMO88 hardware unit, the procedure for updating your firmware and convert
the unit into a MIMO88CONF is as follows:
1. Connect the MIMO88 unit and the networked computer running EclerNet Manager and modify
your network settings to have full connectivity, as detailed in section 7.4 of this manual
(Network Configuration).
2. Add the MIMO88 device to the current project (drag and drop from the folder "Online and
Unused Devices" to the folder "Devices -> All").