KEYENCE LS-5000 - Manual (Page 73)

Chapter 6 Normal Mode
67
6
J J J J J Initialize
This function resets all settings to the initial values. ➮ See p. 116 and 117.
■ Setting Procedure
1. Select the OPTIONS screen.
Press the [OPTIONS] button.
2. Select the UTILITY screen.
Press the [UTILITY] button.
3. Perform initialization.
Press the [INITIALIZE] button.
4. Press the [YES] button.
5. Press the [OK] button.
OPTIONS UTILITY AREA CHECK
LASER ON OPTIONS NOR
MAL
P. 1
DISPLAY
DATA
LIMIT
SETUP
PROGRAM CALIB OPTIONS
AREA
OUTPUT
INSPECT
UTILITY
Select Option to setup.
MODE
CHANGE
Normal
-> Pitch
LASER ON UTILITY NOR
MAL
P. 1
AREA CHECK
INITIALIZE
ON
PANEL
mm
ONE-SCAN MODE
PROGRAM SELECT
DISPLAY UNIT
ESC
LASER ON INITIALIZE NOR
MAL
P. 1
Initialize the current settings?
YES NO
LASER ON INITIALIZE NOR
MAL P. 1
The current settings
will be initialized.
OK CANCEL