KEYENCE LS-5000 - Manual (Page 11)

Chapter 1 Laser Safety Precautions
1
LS-5041T
LS-5041T
Laser ON alarm indicator
• LASER ON alarm indicator
The scanning head has an LED which indicates that the laser beam is currently
being emitted or is about to start.
Even when you are wearing safety goggles, you can check whether the indicator is
lit or not.
• Laser beam shield
The LS-5000 series includes a laser beam shield which is to be attached to the
scanning head’s transmitter. Attach this shield when your eyes may be exposed to
the laser beam, for example during operation at the front of the scanning head.
* FDA safety standards do not require a laser beam shield to be provided with
Class II laser products. However, the shield should be used if necessary.
5
Appearance with the laser
beam shield not attached Appearance with the laser
beam shield attached
LS-5041T LS-5041T
Laser beam shield
■ LS-5041
■ LS-5121
Appearance with the laser
beam shield not attached
Appearance with the laser
beam shield attached
LS-5121T LS-5121T