KEYENCE LS-5000 - Manual (Page 110)

Chapter 10 Display System Setup
104
10
10.1 Display System Setup
This section describes how to adjust the display backlight intensity, contrast,
reversing, backlight OFF time, and buzzer volume.
Note: The system setup menu will automatically return to operation mode after
completing the setup. However, follow the prompt if "Turn on the power again"
appears.
10.1.1 Adjusting Backlight Intensity
The backlight intensity can be adjusted in increments of two intensity levels.
■ Setting Procedure
1. Select the SYSTEM MODE screen.
Press the touch switches at three corners of the screen simultaneously.
2. Select the OPTION SETUP screen.
Press the [OPTION SETUP] button.
3. Adjust the backlight intensity.
Every time you press the [BACKLIGHT ADJUST] button, the light intensity
increments by two intensity levels.
Press the [OK] button.
SELF-CHECK
LS SYSTEM SETUP
OPTION SETUP
SYSTEM MODE
TO RUN MODE
- +
REVERSE DISPLAY
CONTRAST
> > > > > >
BACKLIGHT ADJUST
OPTION SETUP
OK
CANCEL