KEYENCE LK-G Series - Manual (Page 95)

3-37
3
LK-G-M-NO3-E
3 Function Settings
Setting the Common Function
This section describes the functions common to each program No.
List of Functions and Function Nos.
* The shaded cells are set by default.
* Function "F" sets the number of data and accumulation rate as a sub-function.
List of Default Values and Setting Ranges
Function Function Function No. Reference
Function display 0 1 2 3 4 5
page
A Sampling rate 20 µs 50 µs 100 µs 200 µs 500 µs 1000 µs 3-39
Y LE 20 50 100 200 500 1000
b Mutual interference
prevention OFF ON 3-40
AltEr oFF on
Timing synchronization Asynchronous Synchronous 3-41
Syn n-Syn[ Syn
d Comparator output format Normal HOLD Off-delay 3-42
o-For nor al xoLd delay
E Strobe time 2 ms 5 ms 10 ms 20 ms 3-43
S-t E 2 5 10 20
F Data storage OFF OUT1 OUT2 OUT 1 , 2 3-44
d-Str oFF oUt1 oUt2 oUt1.2
Refer to "Accumulating the Measurement Value in the Memory (Data Storage Function)"
(page 3-54).
Function Item Settable range Default value Remarks
A Sampling rate 20/50/100/200/500/1000 µs 200 µs
b Mutual interference prevention ON/OFF OFF
Timing synchronization Synchronous/asynchronous Asynchronous
d Comparator output format Normal/hold/delay Normal
E Strobe time 2/5/10/20 ms 2 ms
F Data selection OFF/OUT1/OUT2/OUT1.2 OFF
Number of data 1 to 65536 65536
Accumulation rate 1/2/5/10/20/50/100/200/500/1000 x 20