KEYENCE LK-G Series User Manual
Lk-g series, User’s manual, High-speed, high-accuracy

High-speed, High-accuracy
CCD Laser Displacement Sensor
LK-G Series
User’s Manual
Read this manual before using the system in order
to achieve maximum performance.
Keep this manual in a safe place for future
reference.
High-speed, High-accur
acy CCD Laser Displacement Sensor
LK-G Series User’
s Man
ual
96M1573
0
KEYENCE ITALIA S.p.A.
Phone: 02-6688220 Fax: 02-66825099
KEYENCE SINGAPORE PTE LTD.
Phone: 6392-1011 Fax: 6392-5055
AFFILIATED COMPANIES
KEYENCE CORPORATION OF AMERICA 
Phone: 201-930-0100 Fax: 201-930-0099
KEYENCE DEUTSCHLAND GmbH
Phone: 06102-36 89-0 Fax: 06102-36 89-10
KEYENCE (UK) LIMITED
Phone: 01908-696900 Fax: 01908-696777
KEYENCE FRANCE S.A.
Phone: 01 56 37 78 00 Fax: 01 56 37 78 01
KEYENCE (MALAYSIA) SDN BHD
Phone: 03-2092-2211 Fax: 03-2092-2131
KEYENCE (THAILAND) CO., LTD.
Phone: 02-369-2777 Fax: 02-369-2775
KOREA KEYENCE CO., LTD.
KEYENCE TAIWAN CO., LTD.
Phone: 02-2718-8700 Fax: 02-2718-8711
KEYENCE (HONG KONG) CO., LTD.
Phone: 3104-1010 Fax: 3104-1080
KEYENCE INTERNATIONAL TRADING
(SHANGHAI) CO., LTD.
Phone: 021-68757500 Fax: 021-68757550
Phone: 02-563-1270 Fax: 02-563-1271
Specifications are subject to change without notice.
KEYENCE CORPORATION
1-3-14, Higashi-Nakajima,
Higashi-Yodogawa-ku, Osaka, 
533-8555, Japan
Phone: 81-6-6379-2211
Fax: 81-6-6379-2131
© KEYENCE CORPORATION, E LK-G-IM 0056-2 96M1573 Printed in Japan
LK-G-M-F-E.fm 1 ページ 2006年5月11日 木曜日 午前11時16分
Document Outline
- Safety Precautions
 - Organization of this Manual
 - Table of Contents
 - Chapter 1 Before Use
 - Chapter 2 Operations and Functions during Measurement
 - Chapter 3 Function Settings
- Measurement, Data Flow and Functions
 - Setting the Head
- List of Functions and Function Nos.
 - List of Default Values and Setting Ranges
 - List of the Head Setting Screens
 - Setting ABLE
 - Setting the Measurement Mode According to the Measuring Target
 - Specifying the Process When Measurement is Not Possible (Alarm Process)
 - Automatically Teaching the Adjustment Range of ABLE According to the Target
 - Setting the Mounting Mode
 
 - Setting the Conditions of the Measurement Value Output
- List of Functions and Function Nos.
 - List of Default Values and Setting Ranges
 - List of the OUT Setting Screens
 - Calculating Between the Heads
 - Setting the Scaling for Measurement (Calibration)
 - Stabilizing the Measurement by Filtering
 - Using the Hold Function (Measurement Mode)
 - Setting the Trigger Condition
 - Measuring with Offset
 - Setting the Unit and the Minimum Display Unit
 - Scaling the Analog Output
 - Outputting the Analog Output Without Holding
 
 - Setting the Common Function
- List of Functions and Function Nos.
 - List of Default Values and Setting Ranges
 - List of the Common Function Setting Screens
 - Setting the Sampling Rate of Measurement Value
 - Setting the Mutual Interference Prevention Function
 - Setting the External Timing Input
 - Setting the Output Form of the Tolerance Comparator
 - Setting the Strobe Output Time
 - Accumulating the Measurement Value in the Memory (Data Storage Function)
 
 - Setting the Operations of the Equipment (Environment Settings)
- List of Functions and Function Nos.
 - List of Default Values and Setting Ranges
 - List of the Environment Setting Screens
 - Setting the Communication Specifications of the RS-232C
 - Setting the Program Switching Method
 - Copying/Initializing the Program
 - Preventing Erroneous Operation on the Panel (Panel Lock)
 - Reducing the Power Consumption (Eco Mode)
 
 
 - Chapter 4 Input/Output Terminals
 - Chapter 5 RS-232C
 - Chapter 6 Specifications of the LK-G Series
 - Appendices
 
