KEYENCE LK-G Series - Manual (Page 109)

3-51
3
LK-G-M-NO3-E
3 Function Settings
Copying/Initializing the Program
Copying and initializing of the program are performed.
■ Copying procedure of the program
1
Press the key, and select " Env " with the key.
Set the environment settings.
2
Press the key, and select function " " with the
key.
Perform copying/initialization of the program.
3
Press the key, and select " -0 " with the key.
Copying process of the program starts.
4
Press the key, and specify the original program No.
with the key.
Program No. 1 is specified as the source in this example.
Function No. Process Function
[-0 [oPY Copy Performs copying by specifying the source program No. and
destination program No.
[-1 ErASE Initialization Initializes the program of the specified program No.
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM