KEYENCE LK-G Series - Manual (Page 171)

6-17
6
LK-G-M-NO6-E
6 Specifications of the LK-G Series
Response Delay Time
■
Measurement response time
This is the period of time until the unit recognizes the change in the target and outputs the
signal. This is calculated by the following formula.
• Measurement response time = measurement average time + refresh rate + internal
processing time (T6 x 4)
■
Power ON reset time
This is the period of time until measurement starts after turning on the power.
• Power ON reset time = approx. 5 sec.
Outside Dimensions
Unit (mm)
■ Controller
LK-G3001V/LK-G3001PV
Refer to "Timing Details" (page 4-16) for the measurement average time, refresh rate (T5),
and sampling rate (T6).
4-M4 screw, depth:6
6
62 117 (65)
33 70
43
9.5
124