KEYENCE LK-G Series User Manual

Page 79

3-21

LK-G-M-NO3-E

3 Function Settings

Press the

key to set the input value 1 of the head A,

point 1 by using the

and

keys.

The current measurement value is loaded if the

key

is pressed.

Press the

key to set the input value 1 of the head A,

point 1 by using the

and

keys.

Press the

key to set the input value 2 of the head A,

point 2 by using the

and

keys.

The current measurement value is loaded if the

key

is pressed.

Press the

key to set the input value 2 of the head A,

point 2 by using the

and

keys.

Press the

key to register the setting result. Press the

key to return to the measurement state.

When the following conditions are not satisfied, "

Err-7

" is displayed and the setting can-

not be performed. Press the

key to cancel the error, and set the scaling again.

(1) Input value 1 - Input value 2 0

(2)

If the

key is pressed while inputting the value, the current measurement value is

inputted. If it is pressed for three seconds, the default value is inputted.

OUT1

TIM

OUT2

TIM

OUT1

TIM

OUT2

TIM

OUT1

TIM

OUT2

TIM

OUT1

TIM

OUT2

TIM

Note

Displayed value2 - Displayed value 1

<10

Input value 2 - Input value 1

Reference