KEYENCE LK-G Series - Manual (Page 70)

3-12
3
LK-G-M-NO3-E
3 Function Settings
Setting the Mounting Mode
The LK-G Series measures the displacement of the target by measuring the reflected laser
beam. When much of the surface of the target is specular, such as a mirror or glass, the
mirror-reflection component of the reflective light increases. In such a case, set the mirror
reflection setup to receive the specular reflection light.
In such a case, mount the head for mirror reflection.
The following two types of mounting mode are available.
■ Setting procedure of the mounting mode
1
Hold down the key, and select " kEAd-A " with the key.
"Head A" is set in this example.
2
Press the key, and select function " e " with the
key.
Set the mounting mode.
3
Press the key, and select " e-0 " with the key.
Select the diffuse reflection mode.
4
Press the key to register the setting. Press the
key to return to the measurement state.
When the LK-G15/LK-G10 is connected, the setting of the mounting mode is invalid.
Function No. Mounting
mode
Function
E-0 d FF-S Diffuse
reflection Sets head for diffuse reflection. Select this in normal cases.
E-1 rr-S Mirror
reflection Sets head for mirror reflection mode. Select this when the
measurement target is a mirror, glass or other specular
surfaces.
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
HI GO LO OUT2 TIM
OUT1 HI GO LO TIM
HI GO LO OUT2 TIM
OUT1 HI GO LO TIM
Note