KEYENCE LK-G Series - Manual (Page 81)

3-23
3
LK-G-M-NO3-E
3 Function Settings
■ Functions of the low-pass filter and high-pass filter
Set the cutoff frequency for each of the filters.
The process when the filter is set is as follows.
■ Setting procedure of averaging
The setting procedure is described below for the case where the averaging is set to OUT1 as
an example.
1
Hold down the key, and select " oUt-1 " with the
key.
2
Press the key, and select function " [ " with the
key.
Set the filter.
3
Press the key, and select " [-0 " with the key.
Set "Moving average".
Measurement value
Time
Measurement value
Time
Measurement value
Time
Input waveform
Waveform by filtering with high-pass.
Waveform by filtering with low-pass.
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM