KEYENCE LK-G Series - Manual (Page 108)

3-50
3
LK-G-M-NO3-E
3 Function Settings
Setting the Program Switching Method
Whether the program No. is switched from the display panel or from the external terminal input
is set.
■
Setting procedure of the program switching method
1
Press the key, and select " Env " with the key.
Set the environment settings.
2
Press the key, and select function " b " with the
key.
Set the program switching method.
3
Press the key, and select " b-0 " with the key.
The operation from the panel is set in this example.
4
Press the key to register the setting. Press the
key to return to the measurement state.
To switch the program No. by using the command from the RS-232C, set this setting to
"Panel operation".
Function No. Setting Selection Function
b-0 PanEL Panel Panel operation/RS-232C
b-1 E T Terminal input External terminal input
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
OUT1 HI GO LO
HI GO LO
TIM
OUT2 TIM
Note