Cub Cadet 8404 - Manual (Page 88)

CHAPTER 2 8354/8404
2-66 D615-W02 May-2003
615W2E1A
2) Injection nozzle
(A) Nozzle holder
1. Secure the nozzle retaining nut (7) with a vise.
2. Remove the nozzle holder (1), and take out parts
inside.
(When reassembling)
• Assemble the nozzle in clean fuel oil.
• Install the push rod (4), nothing its direction.
(1) Nozzle Holder (5) Distance Piece
(2) Adjusting Washer (6) Nozzle
(3) Nozzle Spring (7) Nozzle Nut
(4) Push Rod
615W2E0A
c. Disassembling and Assembling
1) Injection pump
IMPORTANT:
• If replacing the pump element, the amount of fuel
injection should be adjusted on specified bench.
(1) Pump Body (5) Delivery Valve
(2) Control Rack (6) Tappet Roller
(3) Delivery Valve Holder (7) Cylinder
(4) Delivery Valve Spring (8) Plunger