Cub Cadet 8404 - Manual (Page 226)

CHAPTER 8 8354/8404
8-16 D615-W02 May-2003
615W819A
615W820A
615W821A
C. Disassembly of Power Steering Unit
a. Disassembly of GEROTOR
1. With end cap upward, lock port of body housing
lightly into vice.
2. Loosen two screws (22) and disassemble housing
(21).
(21) Housing (23) O-ring
(22) Screw
3. Loosen seven screws (1).
4. Disassemble end cap (2).
5. Disassemble O-ring (3) from end cap.
(1) Screw (3) O-Ring
(2) End Cap
6. Detach spacer (5), (7) and O-ring (6) from inside
spline of between rotor (10) and GEROTOR (4).
(4) Stator (7) Spacer
(5) Spacer (10) Rotor
(6) O-Ring
• Power steering units with discharge
capacity of 31 cc/rev and 51 cc/rev
don’t contain spacer.
CAUTION
• Never tighten firmly into vice with rigid
plate and etc.
CAUTION