Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 90)

Installing the Instrument and Plug-in Cards PR 5230 Instrument Manual
EN-90 Sartorius
4.4.9.3 Status-LEDs on Fieldbus Card
Watchdog LED Meaning
Frequency Color
Flashing 1 Hz green Module is initialized and ready for operation.
Flashing 2 Hz green Module is not initialized.
Flashing 1 Hz red Check error in ASIC and FLASH ROM, module is defect.
LEDs
1 2
3 4
LED 1 LED 2 LED 3 LED 4
Lit - - -:
No link.
Lit - - -:
No power.
Lit - - -:
No function.
Lit - - -:
No power or
no IP address.
Lit grn:
Connection established.
Lit grn:
Controlled by a scanner.
Lit grn:
Online,
connection established.
Flashing grn:
Not configured or
scanner in idle state.
Flashing grn:
Packet is received or
transmitted.
Flashing grn:
Online, no connection
established.
Lit red:
Major unrecoverable
fault.
Lit red:
IP Address double,
fatal error.
Flashing red:
Minor recoverable fault.
Flashing red:
Connection timeout.
Alternat. red/grn:
Self test in progress.
Alternat. red/grn:
Self test in progress.
Legend
--- off
red red
grn green
4.4.9.4 Connection
• Take the cable (e.g. patch cable CAT5) into the instrument through
the metal sleeve of the cable gland, strip the insulation and mount
the delivered RJ-45 plug (see mounting informations).
• Put the RJ-45 plug into the RJ-45 connecting socket of the fieldbus
card.
• Tighten the cable gland of the instrument.