Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 108)

Commissioning PR 5230 Instrument Manual
EN-108 Sartorius
- Setup
- Configuration
- Interface settings
- Communication type SBI protocol, xBPI protocol
- Baudrate for SBI 150 baud, 300 baud, 600 baud, 1200 baud, 2400 baud, 4800 baud,
9600 baud, 19200 baud
- Parity for SBI Mark, Space, Odd, Even
- Stop bits 1 stop bit, 2 stop bits
- Handshake Software handshake, CTS with 2 chr.pau, CTS with 1 chr.pau
- Print in weigh mode on requ always, on requ when stab, on requ with store, auto without stable,
auto when stable
- Auto Print start/stop by ESCP, not stoppable
- Output format without ID 16 byte, with ID 22 byte
- Data output interval with each display, after 2 updates, after 5 updates, after 10 updates,
after 20 updates, after 50 updates, after 100 updates
- Parameter change can be changed, cannot be changed
- Select specification group
- Specif. group 1 …6 see Operating Instructions of the relevant scale
- Show device info
- Set user User name of the unit
- Set SBN The xBPI address of the interface has to be <0 >, because there is no bus
mode.
- Config
- Type xBPI-Scale
- W&M , OIML, NSC, NTEP
- Tare timeout 0.1 s ... <2.0 s> ... 25 s,
- Serial number <0>, if >0 the serial number will be checked (at legal-for trade scale)
- SBN Address <0 > no bus mode.
- Param
- Assigned to xBPI-Port
- Baudrate <9600>, 19200
- Bits 8
- Parity odd
- Stopbits <1>, 2