Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 12)

Transmitter in Field Housing PR 5230 Instrument Manual
EN-12 Sartorius
2 Transmitter in Field Housing
The instrument is equipped with a 128 x 64 pixel display for weight values with max. 6 digits and additional
status indication.
2.1 Overview of the Instrument
- Accuracy 10,000 e (Class III) for the weighing electronics
- High-speed conversion with response times from 5 msec
- Weight indication with status by monochrome 128 x 64 pixel display
- 3 function keys in the housing, function configurable
- Wall-mounted stainless steel housing, with IP 66 protection
- LAN adaptor with 10/100 Mbit/sec for data transfer, calibration, parameterization
- RS-232 interface, built-in; for connecting e.g. a printer or a remote indicator
- RS-485 interface, built-in; for connecting e.g. PC
- Expansion possible by addition of following plug-in circuit boards (3 slots):
- Analog output board PR 5230/06
- Load cell junction board PR 5230/22
- Interfaces PR 1721/4x
- 3 opto-decoupled outputs (optional)
- 3 configurable relay outputs with change-over contact
- 3 configurable optocoupler inputs, potential-free internal supply possible (optional)
- Galvanically isolated interfaces (except RS-232)
- Wide range power supply for 100 to 240 V AC, protection class I (protective earth)
- Version PR 5230 for 24 V direct current
- Version PR 5230 with intrinsically safe load cell supply (optional)
- Plug-in connections inside the instrument for load cells, inputs/outputs, LAN adaptor, serial interfaces
- Calibration using PC tool (Browser/VNC)
- Calibration using weights, by entering mV/V values, or directly, using load cell data ("smart calibration")
- Software configuration of the interface cards, e.g. for remote display or printer
- Analog test for the weighing electronics
Communication Protocols
For the internal RS-232 or RS-485:
Fieldbus Slave (accessories):
- Remote display protocol - PR 1721/41 ProfiBus-DP
- Printer - PR 1721/42 InterBus-S
- J-Bus/ModBus (Slave) - PR 1721/44 DeviceNet
- SMA protocol - PR 1721/45 CC-Link
- xBPI protocol - PR 1721/46 ProfiNet I/O
- Asycom protocol - PR 1721/47 EtherNet-IP
For the internal LAN:
- ModBus-TCP
- Ethernet-TCP/IP
- OPC