Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 184)

SMA Protocol PR 5230 Instrument Manual
EN-184 Sartorius
Scale Reply with ‘I’ and ‘N’ Commands
Reply format with ‘I' and 'N' commands (variable length):
:
Reply format and meaning:
Start of reply from 'I'/'N' command
The field name is three characters long, left-adjusted and filled up with spaces, if necessary.
The following fields are sent:
“SMA” level/revision
(reply from ‘I’ command)
“TYP” Scale type: ‘S’= scale
(reply from the 1st ‘N” command)
“CAP” Max, unit, scale interval and decimal position, separated by ‘:’
Meaning: yyyyyy= uuu:c..c:n:d
uuu= unit
n= scale interval (e.g. 1, 2, 5,10,20…) without decimal point
d= decimal point position
‘0’= without, ‘1’= xxxx.x, ‘2’= xxx.xx, ‘3’= xx.xxx , ... etc.
(reply from the 2nd ‘N’ command)
“CMD” Supported SMA commands
(reply from the 3rd ‘N’ command)
“END” This is always the last inscription field
(reply from the last ‘N’ command)
‘:’ Separator between field name and field content.
The data field contains up to 25 characters.
The SMA field contains
Meaning: level = (1, 2, etc.); revision = (1.0, 1.1, etc.)
End of reply from 'I'/'N' command