Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 130)

Commissioning PR 5230 Instrument Manual
EN-130 Sartorius
5.5.5 xBPI Parameter Tables
The parameters which must be entered in -[Weighingpoint]-[xBPI-xBPI-Scale]-[Setup]-[Configuration]-
[Weighing parameters]/[Application settings]/[Interface settings] are listed in the following tables.
Weighingpoint/ xBPI-Scale Setup
Ambient conditions Very stable cond. Select the parameter with and
Application/Filter standard mode Make the setting with
.
Stability range 8 digit
Stability symb. delay no delay
Tare parameter at any time
Auto zero function Auto Zero off
Leave with .
[Weighingpoint A-xBPI-scale]-[Setup]-[Configuration]-[Weighing parameters]
- Ambient conditions
- Very stable cond.
- Stable conditions
- Unstable cond.
- Very unstable cond
- Application/Filter
- standard mode
- manual filling
- automatic dosing
- checkweighing
- Stability range
- 0,25 digit
- 0,5 digit
- 1 digit
- 2 digit
- 4 digit
- 8 digit
- Stability symb.delay
- no delay
- short delay
- long delay
- extrem long delay
- Tare parameter
- at any time
- not until stable
- Auto zero function
- Auto Zero on
- Auto Zero off
- Adjustment function
- ext.adj.w.fact.wt.
- ext.adj.w.user.wt.
- ext.adj.w.pres.wt.
- internal adjust
- ext.lin.w.fact.wt.
- ext.lin.w.pres.wt.
- Confirm preload
- Delete preload
- adjust disabled
- Confirming adjust.
- automatically
- manual
- Zero range
- 1% of max load
- 2% of max load
- 5% of max load
- 10% of max load
- Power-On zero range
- factory settings
- 2% of max load
- 5% of max load
- 10% of max load
- 20% of max load
- Power-On tare/zero
- activ
- inactiv
- only for zeroing
- Measure rate
- normal output
- fast output
- Calibration check
- Off
- Calibration prompt
- External adjustment
- Accessible
- Blocked
- Maximum capacity
- reduced by preload
- constant