Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 143)

PR 5230 Instrument Manual Commissioning
Sartorius EN-143
xBPI protocol [xBPI Port]
To configure the serial interfaces, press -[Serial ports parameter]-[ xBPI-Port]
to select a RS-485 or RS-232 interface.
Press
to select the specific parameter.
Press to select the s respective values.
The light gray displayed parameter cannot be changed.
Setup/ Serial ports
Printer Slot1 RS232
Remote display Builtin RS232
JBUS/MOD-Bus -none-
SMA -none-
xBPI-Port Slot1..RS485
Click [Param].
Param
Only the baud rate and the stop bits are adjustable; the other parameters are fixed.
Setup/Serial ports/ Slot1 RS485
Assigned to xBPI-Port
Baudrate 9600 bd 9600, 19200
Bits 8
Parity odd
Stopbits 1 1, 2
Asycom protocol [Asycom]
To configure the serial interfaces, press -[Serial ports parameter]-[Asycom] to select a RS-485 interface.
Press to select the specific parameter.
Press to select the respective values.
The light gray displayed parameter cannot be changed.
Setup/Serial ports/ Builtin RS485
Assigned to Asycom
Protocol Asycom V1 Select V1, V2 or V3*
Baudrate 9600 bd 300, 600, .... 19200
Bits 8 7, 8
Parity even
Stopbits 1
Slave A Select A - Z
* V1 = for old communication programs
V2 = for recipe controller
V3 = for OPC
The old EW command sets (e.g. PR 1612) for the Asycom protocol are described in Chapter 8.